Header_5.jpg
Joe      Inquiry      Links      FAQ      Login

Making a Violin  
Raw Top, Back, Ribs  
Corner Blocks & Lining  
Relative Sizes  
Ribs on Form  
The Neck  
The Marked-up Plates  
The cut out Plates  
The Plates Routed  
Linings Clamped  
Linings in Place  
Lining and Corner Block  
Lining and End Block  
Plates being shaped.  
Plates shaped to form  
Thickness guide holes  
F-hole outlines  
Insides of plates  
F-holes cut - outside  
F-holes cut - inside  
Bass Bar material  
Back glued to ribs  
Ribs and Back  
Back and Ribs  
Form ready for removal  
Bass Bar in place  
Finished Bass Bar  
Linings glued to rib tops  
Belly glued onto ribs.  
Back purfling groove.  
Belly purfling groove.  
Back purfling inserted.  
Belly purfling inserted in groove.  
Maker's signature.  
Carved Scroll  
Finished scroll and pegbox  
Regluing Upper Block  
Neck glued into body  
Finger board and nut  
Test fit of finger board  
First coat of varnish  
First varnish coat - back  
Varnishing finished - Back  
Varnishing finished  
Finished violin  
Finished violin - scroll  
Finished violin - composite  

The Neck

IMG_2015_700.jpg

The neck has been marked from templates, then cut out of the maple block using a bandsaw. Note that the cutout section below the scroll has been kept in one piece for use as a support for later chiseling of the peg box.





 

Privacy Statement

 

© MMV - MMXII Joseph Federer